Monday, June 18, 2018

The Grid - All in Place

All of the pieces of the dimensional grid are now in place.  Now I need to fuse it down and decide on the next step.















Comments are welcomed. I will reply when possible. However at this time Blogger is not notifying me of comments. Of course if you are a "No Reply Blogger"- I can not reply. Links in comments will result in the entire comment being deleted.

Thursday, June 14, 2018

Back to the Grid

I have spent a little more time cutting pieces and placing them into the grid.  It is coming along, although I am not rushing through it.
One thing that I have found really helpful is this set of fine tipped tweezers to place the pieces. To give you a better idea of the size of the pieces, here is a photo with a quarter for size reference.
Until next time,

Comments are welcomed. I will reply when possible. However at this time Blogger is not notifying me of comments. Of course if you are a "No Reply Blogger"- I can not reply. Links in comments will result in the entire comment being deleted.

Thursday, June 07, 2018

Dimensional Grid - part two

Although busy with other things,  I did get a bit more of the dimensional grid in place.
It isn't perfect but it is fun to see it developing.  The shadings in the hand dyed fabrics add more depth to the design. I think that is a real plus.

Google has messed up the part that sends bloggers notifications of comments - so if I don't reply it may be because I haven't seen your comment OR that it is just too time consuming to find your email address to reply.  I am truly sorry about this.


Comments are welcomed. I will reply when possible. However at this time Blogger is not notifying me of comments. Of course if you are a "No Reply Blogger"- I can not reply. Links in comments will result in the entire comment being deleted.

Sunday, June 03, 2018

A Start - The Dimensional Grid

Back in early May,  I showed a grid that I had drawn with the possibility of making it into some type of quilt art.   This is my start on it.
On a piece of foam core board, I taped the drawing down. Peeled of the top layer of the Steam-a-Seam so that the sticky part is accessible.  Then thumbtacked it over the drawing.   I used a card stock version of the same drawing to use as a pattern. I cut the pattern into five or six larger pieces.
Starting with the center I cut black and white pieces for the  center rectangle(rhombus?) It isn't square.   Then I took the next section and cut  dark blue and white pieces for that section.

I will tell you that some good tweezers are very helpful in placing the pieces to get them where you want them.  I will show those in a future post as I work through this process and share it with you.

Comments are welcomed. I will reply when possible unless otherwise stated. However at this time Blogger is not notifying me of comments. Of course if you are a "No Reply Blogger"- I can not reply. Links in comments will result in the entire comment being deleted.